The Corrosion factor within oil and gas well and production systems is a serious matter resulting in failures. Corrosion may not only cause economic losses but may also bring with it problems of safety and protection of resources. ...
Corrosion and Prevention in Oil and Gas Well - Part 1
The Corrosion factor within oil and gas well and production systems is a serious matter resulting in failures. Corrosion may not only cause economic losses but may also bring with it problems of safety and protection of resources. ...
Basic Formulas - Specific Gravity (SG)
Specific Gravity (SG)
Specific gravity using mud weight, ppg
SG = mud weight, ppg : 8.33 ...
Introduction to Drilling Fluids - Functions and Composition.
Intro
The successful completion of an oil well and its cost depend to a considerable extent on the properties of the drilling fluid. ...
Converting Pressure into Mud Weight
Converting Pressure into Mud Weight
Convert pressure, psi, into mud weight, ppg, using feet as the unit of measure
Mud weight, ppg = pressure, psi : 0.052 : TVD, ft ...
Basic Formulas - Converting Pressure into Mud Weight
Converting Pressure into Mud Weight
Convert pressure, psi, into mud weight, ppg, using feet as the unit of measure
Mud weight,...
Engineered vs Geometric Completions, improving perforations efficiency to 28%
A case study by Schlumberger showing Engineered Completions improve Eagle Ford (Shale) Perforation efficiency 28%
Open- and cased-hole logging used to optimize positioning of fracture stages and perforation clusters for more efficient production from horizontal wells ...
Open- and cased-hole logging used to optimize positioning of fracture stages and perforation clusters for more efficient production from horizontal wells ...
Basic Formulas - Hydrostatic Pressure (HP)
Hydrostatic Pressure (HP)
Hydrostatic pressure using ppg and feet as the units of measure
HP = mud weight, ppg x 0.052 x true vertical depth (TVD),ft ...
Basic Formulas - Pressure Gradient
Pressure Gradient
Pressure gradient, psi/ft, using mud weight, ppg
psi/ft = mud weight, ppg x 0.052 ...
RFID Technology for Deepwater Drilling and Completions Challenges
Deepwater operators continually face technical and environmental challenges to drilling and completing wells safely and efficiently....
Wellbore Completion Definition
Based on several well-known sources, Wellbore Completion, in general, can be defined as:
Wikipedia
Completion, in petroleum production, is the process of making a well ready for production (or injection). ...
Announcement
Collapse
No announcement yet.
Articles
Collapse
Wellbore Completion learning resources and forum
-
Corrosion and Prevention in Oil and Gas Well - Part 1
-
Created by:
Daniel Panjaitan
- Published: 11th July 2017, 00:56
- 0 comments
Corrosion and Prevention in Oil and Gas Well - Part 1
The Corrosion factor within oil and gas well and production systems is a serious matter resulting in failures. Corrosion may not only cause economic losses but may also bring with it problems of safety and protection of resources. ... -
Created by:
-
Basic Formulas - Specific Gravity (SG)
-
Created by:
Daniel Panjaitan
- Published: 11th July 2017, 00:55
- 989 views
- 0 comments
Basic Formulas - Specific Gravity (SG)
Specific Gravity (SG)
Specific gravity using mud weight, ppg
SG = mud weight, ppg : 8.33 ...Last edited by Daniel Panjaitan; 11th July 2017, 00:55. -
Created by:
-
Introduction to Drilling Fluids - Functions and Composition.
-
Created by:
Daniel Panjaitan
- Published: 3rd May 2017, 02:20
- 393 views
- 0 comments
Introduction to Drilling Fluids - Functions and Composition.
Intro
The successful completion of an oil well and its cost depend to a considerable extent on the properties of the drilling fluid. ...Last edited by Daniel Panjaitan; 27th June 2017, 01:24. -
Created by:
-
Basic Formulas - Hydrostatic Pressure (HP)
-
Created by:
Daniel Panjaitan
- Published: 3rd May 2017, 02:14
- 433 views
- 0 comments
Basic Formulas - Hydrostatic Pressure (HP)
Hydrostatic Pressure (HP)
Hydrostatic pressure using ppg and feet as the units of measure
HP = mud weight, ppg x 0.052 x true vertical depth (TVD),ft ...Last edited by Daniel Panjaitan; 27th June 2017, 01:25. -
Created by:
-
Engineered vs Geometric Completions, improving perforations efficiency to 28%
-
Created by:
Daniel Panjaitan
- Published: 28th April 2017, 09:04
- 199 views
- 0 comments
Engineered vs Geometric Completions, improving perforations efficiency to 28%
A case study by Schlumberger showing Engineered Completions improve Eagle Ford (Shale) Perforation efficiency 28%
Open- and cased-hole logging used to optimize positioning of fracture stages and perforation clusters for more efficient production from horizontal wells ...Last edited by Daniel Panjaitan; 27th June 2017, 01:25. -
Created by:
-
RFID Technology for Deepwater Drilling and Completions Challenges
-
Created by:
Daniel Panjaitan
- Published: 28th April 2017, 09:02
- 0 comments
RFID Technology for Deepwater Drilling and Completions Challenges
Deepwater operators continually face technical and environmental challenges to drilling and completing wells safely and efficiently....
Last edited by Daniel Panjaitan; 27th June 2017, 01:26. -
Created by:
-
Basic Formulas - Pressure Gradient
-
Created by:
Daniel Panjaitan
- Published: 28th April 2017, 09:00
- 2474 views
- 0 comments
Basic Formulas - Pressure Gradient
Pressure Gradient
Pressure gradient, psi/ft, using mud weight, ppg
psi/ft = mud weight, ppg x 0.052 ...Last edited by Daniel Panjaitan; 27th June 2017, 01:26. -
Created by:
-
Wellbore Completion Definition
-
Created by:
Daniel Panjaitan
- Published: 28th April 2017, 08:58
- 28 views
- 0 comments
Wellbore Completion Definition
Based on several well-known sources, Wellbore Completion, in general, can be defined as:
Wikipedia
Completion, in petroleum production, is the process of making a well ready for production (or injection). ...Last edited by Daniel Panjaitan; 27th June 2017, 01:26. -
Created by:
-
Converting Pressure into Mud Weight
-
Created by:
Daniel Panjaitan
- Published: 28th April 2017, 08:56
- 1123 views
- 0 comments
Converting Pressure into Mud Weight
Converting Pressure into Mud Weight
Convert pressure, psi, into mud weight, ppg, using feet as the unit of measure
Mud weight, ppg = pressure, psi : 0.052 : TVD, ft ...Last edited by Daniel Panjaitan; 27th June 2017, 01:27. -
Created by:
There are no articles in this category.
Please log in to your account to view your subscribed posts.
Article Tags
Collapse
- calculation (5)
- case study (1)
- definitions (1)
- downhole tool (1)
- eagle ford (1)
- engineered completion (1)
- formula (5)
- hydrostatic pressure (1)
- mud (2)
- mud weight (1)
- perforation (1)
- pressure gradient (1)
- problems (1)
- rfid (1)
- schlumberger (1)
- specific gravity (1)
- sulfur (1)
- surface facility (1)
- weatherford (1)
widgetinstance 218 (Latest Articles) skipped due to lack of content & hide_module_if_empty option.